|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MP4009 TOSHIBA Power Transistor Module Silicon PNP Triple Diffused Type (Four Darlington Power Transistors in One) MP4009 High Power Switching Applications Hammer Drive, Pulse Motor Drive Inductive Load Switching Industrial Applications Unit: mm * * * * * Small package by full molding (SIP 10 pins) High collector power dissipation (4-device operation) : PT = 4 W (Ta = 25C) High collector current: IC (DC) = -5 A (max) High DC current gain: hFE = 1000 (min) (VCE = -3 V, IC = -3 A) Complementary to MP4003 Maximum Ratings (Ta = 25C) Characteristics Collector-base voltage Collector-emitter voltage Emitter-base voltage Collector current Continuous base current Collector power dissipation (1 device operation) Collector power dissipation (4 devices operation) Junction temperature Storage temperature range DC Pulse Symbol VCBO VCEO VEBO IC ICP IB PC Rating -100 -100 -5 -5 -8 -0.1 2.0 Unit V V V A A W JEDEC JEITA TOSHIBA 2-25A1A Weight: 2.1 g (typ.) PT Tj Tstg 4.0 150 -55 to 150 W C C Array Configuration R1 R2 1 10 2 4 6 8 3 5 7 9 R1 5 k, R2 120 1 2004-07-01 MP4009 Thermal Characteristics Characteristics Thermal resistance from junction to ambient (4-device operation, Ta = 25C) Maximum lead temperature for soldering purposes (3.2 mm from case for 10 s) TL 260 C Symbol Max Unit Rth (j-a) 31.3 C/W Electrical Characteristics (Ta = 25C) Characteristics Collector cut-off current Collector cut-off current Emitter cut-off current Collector-base breakdown voltage Collector-emitter breakdown voltage DC current gain Collector-emitter Base-emitter Symbol ICBO ICEO IEBO V (BR) CBO V (BR) CEO hFE (1) hFE (2) VCE (sat) VBE (sat) fT Cob Test Condition VCB = -100 V, IE = 0 A VCE = -100 V, IB = 0 A VEB = -5 V, IC = 0 A IC = -1 mA, IE = 0 A IC = -30 mA, IB = 0 A VCE = -3 V, IC = -0.5 A VCE = -3 V, IC = -3 A IC = -3 A, IB = -12 mA IC = -3 A, IB = -12 mA VCE = -3 V, IC = -0.5 A VCB = 50 V, IE = 0 A, f = 1MHz Output 10 Min -0.3 -100 -100 1000 1000 3 Typ. 40 Max -10 -10 -2.0 -2.0 -2.5 Unit A A mA V V Saturation voltage V MHz pF Transition frequency Collector output capacitance Turn-on time ton Input IB2 IB1 0.5 Switching time IB2 Storage time IB1 tstg VCC = -30 V 3.0 s 20 s Fall time tf -IB1 = IB2 = 12 mA, duty cycle 1% 2.0 Marking MP4009 JAPAN Part No. (or abbreviation code) Lot No. A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 2004-07-01 MP4009 IC - VCE -8 -100 -30 Common -15 emitter Ta = 25C -8 Common emitter VCE = -3 V IC - VBE IC (A) -7 -6 -3 -4 -1 -2 IB = -0.3 mA 0 0 0 -2 -4 -6 -8 -10 IC (A) Collector current -6 Collector current -4 -2 Ta = 100C 25 -55 0 0 -0.8 -1.6 -2.4 -3.2 -4.0 Collector-emitter voltage VCE (V) Base-emitter voltage VBE (V) hFE - IC 10000 5000 Ta = 100C 25 Common emitter VCE = -3 V -2.8 VCE - IB Common emitter Ta = 25C hFE VCE 3000 (V) -2.4 DC current gain 1000 500 300 Collector-emitter voltage -55 -2.0 -8 -7 -6 -5 -4 -3 -2 -1 IC = -0.1 A -1.6 -1.2 100 50 -0.05 -0.1 -0.8 -0.3 -1 -3 -10 -30 Collector current IC (A) -0.4 -0.1 -0.3 -1 -3 -10 -30 -100 -300 -500 Base current IB (mA) VCE (sat) - IC -10 -10 Common emitter -5 -3 IC/IB = 250 Common emitter VBE (sat) - IC Base-emitter saturation voltage VBE (sat) (V) Collector-emitter saturation voltage VCE (sat) (V) -5 -3 IC/IB = 250 Ta = -55C 25 100 -1 Ta = -55C -1 -0.5 -0.3 -0.1 100 25 -0.5 -0.3 -0.1 -0.3 -1 -3 -10 -0.3 -1 -3 -10 Collector current IC (A) Collector current IC (A) 3 2004-07-01 MP4009 rth - tw 300 (C/W) Curves should be applied in thermal 100 limited area. (Single nonrepetitive pulse) The figure shows thermal resistance per device versus pulse width. (4) rth (1) (3) (2) Transient thermal resistance 30 10 3 -No heat sink/Attached on a circuit board(1) 1-device operation (2) 2-device operation (3) 3-device operation (4) 4-device operation 0.01 0.1 1 10 Circuit board 100 1000 1 0.3 0.001 Pulse width tw (s) Safe Operating Area -30 8 PT - Ta (1) 1-device operation (2) 2-device operation (3) 3-device operation 6 (4) 4-device operation Attached on a circuit board -10 -5 10 ms* 1 ms* 100 s* Total power dissipation PT IC max (pulsed)* (W) IC (A) -3 4 (4) (3) (2) Circuit board Collector current -1 -0.5 -0.3 2 (1) 0 0 40 80 120 160 200 Ambient temperature -0.1 *: Single nonrepetitive pulse Ta = 25C VCEO max -30 -100 -200 Ta (C) -0.05 Curves must be derated linearly with increase in temperature. -0.03 -1 -3 -10 Collector-emitter voltage VCE (V) Tj - PT 160 (C) Tj (1) 120 (2) (3) (4) Junction temperature increase 80 Circuit board Attached on a circuit board 40 (1) 1-device operation (2) 2-device operation (3) 3-device operation (4) 4-device operation 0 0 1 2 3 4 5 Total power dissipation PT (W) 4 2004-07-01 MP4009 RESTRICTIONS ON PRODUCT USE * The information contained herein is subject to change without notice. 030619EAA * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of TOSHIBA or others. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in this document shall be made at the customer's own risk. * TOSHIBA products should not be embedded to the downstream products which are prohibited to be produced and sold, under any law and regulations. 5 2004-07-01 |
Price & Availability of MP4009 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |